Configure TP-Link Router as a Wireless Access Point – TP-link Router Setup

Configuring your TP-link router as a wireless access point can generate a wireless local area network – WLAN by the way of acting as a portal for other wireless devices to connect to the network across wired cable connections. You can build up the connection across adjoining your main router to the tplinkwifi.net setup wireless router over a LAN port instead of the mostly used WAN port. To proceed with TP-link router setup and configuration a an access point, find the basic guidelines here:

  • Bind your Main router to the TP-link router over a LAN port utilizing an Ethernet cable.
  • Fasten your computer to a second available LAN port on which your TP-Link router is located, making use of the other Ethernet cable.

It is suggested to not try to attempt accessing the TP-link router as an access point over Wi-Fi network connection.

  • Get through TP-Link router login across a browser supported by your router model.
  • Get going to the web browser to browse tplinkwifi.net in the address bar. Tplinkwifi.net is the default login web address for TP-link router, default IP gateway is also an alternative approach to TP-link router login. For default gateway, you must address 192.168.1.1 as the IP address in the browser.
  • Begin with TP-link router login by entering the default tplinkwifi.net login details in the login page reached ahead of tplinkwifi.net login.
  • Fill in the essential TP-link router default information, which is supposedly “admin” in both the TP-link router login username as well as TP-link router login password tabs for reaching into the TP-link router’s web interface setup page.
  • You are directed to the TP-link router interface to follow TP-link router configuration as an access point for creating a WLAN connection.
  • Choose the Network option and opt for the LAN option on the side menu.
  • Convert the LAN IP address of your TP-Link router to IP address on the same segment of the main home network router. 
  • Opt for Wireless on the same menu.
  •  Access the Wireless Settings of your TP-link router and follow TP-link router configuration by configuring the wireless network name, SSID. It is entirely on you to create the same or different as for your main router. 
  • You will also have to lay out the wireless security settings on screen.
  • Sort out the WPA/WPA2-as a security option by selecting them as it is thought to be the most secure wireless access point option.  
  • Further, organize DHCP and configure the DHCP Settings. You will have to opt for Disable the DHCP Server option. 
  • Choose the System Tools tab and hit on Reboot to reboot your model device.
  • Be patient while your TP-link router takes time to reboot and start over completing the configuration process over tplinkwifi.net login.
  • Bridge your Ethernet cable in between the main home network router and your TP-Link router at any of the 4 available LAN ports. This will permit all the other LAN ports on your TP-Link router as well to grant Internet access to the other wirelessly connected device.
  • This completes the TP-link router setup as an access point

You can then reconnect all your wireless devices to the new wireless local area network created across the TP-link router. Thus, setting up the TP-link router through TP-link router login over tplinkwifi.net login as an access point authorizes any Wi-Fi device of yours to access the wireless Internet network connection through your TP-Link router permitted over wireless network settings –  the wireless network name SSID and Password inputting as you created and had set up above.

Leave a Reply

Your email address will not be published. Required fields are marked *