tplinkwifi.net

tplink wifi setup | tplink login | tplinkwifi.net

Skip to content
  • Home
  • Blogs
  • FAQ’s
  • Contact us
  • Why Fail to Access TPlinkwifi.net?

tplinkwifi.net login

How to Setup and Install TP-Link Archer C9

Posted on February 11, 2021 by router

Connect the Hardware

If your Internet connection is through an coaxial cable from the wall rather than through a DSL / Cable / Satellite modem, connect the coaxial cable on to the router’s Internet port, then follow steps 5 and 6 to finish the hardware connection

  1. Install the antennas
  2. Close up the modem, and take away the backup battery if it’s one.
  3. Connect the modem to the web port on your router with a coaxial cable .
  4. Activate the modem, then wait about 2 minutes for it to restart.
  5. Turn on the router.
  6. Verify that the subsequent LEDs are on and solid before continuing with the configuration.

Configure via Web Browser:-

  1. As well as connect your computer to the router (Wired or Wireless):-
  2. Wired:- close up the Wi-Fi on your computer and connect the devices.
  3. Wireless:- Use the default wireless network name (SSID) and password printed on the merchandise label on the rear panel of the router to attach wirelessly.

Configure the router with a web browser:-

  1. Enter http://tplinkwifi.net or http://192.168.0.1 in the address bar of a web browser. As well as use admin for both username and password, then click Login.
  2. Select your region and time zone, and click next.
  3. Select your WAN Connection Type, or click Auto Detect if you are unsure of what your connection type is. Click next and follow the instructions.
  4. Use the default or change the wireless settings, and click next.
  5. Confirm your settings and then click Save to continue or back to make changes.
  6. Test your Internet connection, then click Finish to quit the Quick Setup.

Configure via Tether App:-

TP-LINK’s Tether app lets you conveniently access your router:-

1.View information about the clients on your network.

2.Block network access from specific users or devices.

3.Set up Parental Control with access time and content restrictions.

4.Change the basic wireless network settings easily.

How to start:-

  1. Scan your QR code to download the TP-LINK Tether app from the Apple App Store or Google Play.
  2. As well as ensure your smart device is wirelessly connected to the home network.
  3. Hence launch the Tether app and start managing your home network.

USB Features:-

Hence use the USB ports for media sharing, storage sharing and printer sharing across your local network. You can also find out an FTP server to access your files remotely through the web .

FAQ (Frequently Asked Questions)

What am i able to do if the login window doesn’t appear?

  1. If the computer is set to a static or fixed IP address, change the setting to obtain an IP address automatically.
  2. Verify if http://tplinkwifi.net or http://192.168.0.1 is correctly entered in the web browser. Alternatively, enter http://192.168.1.1 in the web browser.
  3. Use another web browser and try again.
  4. Reboot your router and try again.
  5. Disable and enable the network adapter in use again.

What am i able to do if I cannot access the Internet?

  1. As well as check if the Internet is working properly by connecting a computer directly to the modem via an Ethernet. If it’s not, contact your Internet Service Provider.
  2. Open a web browser, enter http://tplinkwifi.net or http://192.168.0.1 and run the setup again. 3. Reboot your router and try again.
  3. Hence for cable modem users, reboot the modem first. As well as the problem still exists, log into the Web Management page of the router, and go to Advanced > Network > MAC Clone, click Clone MAC Address and then click Save.

How do I restore your router to its factory default settings?

  1. While the router is powered on, press and hold the Reset/WPS button on the back until the LED blinks.
  2. Log into the Web Management page of the router, and go to Advanced > System Tools > Factory Defaults, click Restore. The router will restore and reboot automatically.

What can I do if I forgot my Web Management password?

Reset the router, and then use the default admin (all lowercase) for both username and password to log in.

Posted in TP-Link Archer C9
Tagged Archer C9 Tp-Link router setup C9 Archer Tp-Link router setup How to Setup and Install TP-Link Archer C9 Setup and Install TP-Link Archer C9 TP-Link Archer C9 tplinkwifi tplinkwifi net tplinkwifi router login tplinkwifi.net tplinkwifi.net login tplinkwifi.net setup tplinkwifinet.com
Leave a comment

How to use Guest Network Access on TP-link Archer A7 Router?

Posted on February 3, 2021 by router

This TP-link router setup function allows you to provide Wi-Fi internet access for guests without authorizing any access to TP-link Archer A7 router’s main network and personal files. This lets you create a guest network for them along with letting you customize guest network options to ensure wireless network security. 

The initial step to TP-link Archer A7 router setup (TP-link setup) is tplinklogin to access the web based utility interface.

How to use Guest Network Access on TP-link Archer A7 Router?

Steps to Create Guest Network Access on TP-link Archer A7 Router – TP-link Setup via tplinkwifi.net:

  • Open any TPlinklogin supported web browser on your computer which should be prior linked to TP-link Archer A7 router.
  • Navigate to TP-link Archer A7 router login default web address http://tplinkwifi.net default for tplinklogin in the address bar.
  • Alternatively, if tplinkwifi.net has an error with tp link login access, visit the default IP address which is http://192.168.0.1 or http://192.168.1.1.
  • TP-link Archer A7 router login page appears on the screen.
  • Enter a tplink login default password and username for TP-link Archer A7 router secure login. 
  • The TP-link login default username and password are “admin” and should be keyed in the login fields.
  • Click on log in to access the TP-link Archer A7 router’s web based utility page.
  • Go to the Advanced menu option on the utility page.
  • Click on the Guest Network option/link.
  •  Access the Wireless section to choose Enable Guest Network by selecting the checkbox.
  • Create a guest network according to your requirement.
  • As TP-link Archer A7 router is dual band, select both 2.4GHz or 5GHz network bands and tick to select the Enable Guest Network checkbox.
  • Also, customize the wireless network name SSID by changing it from default values. 
  • Setup the wireless Security mode to WPA/WPA2 Personal for securing the network.
  • The guest network is set up on TP-link Archer A7 router.
  • The guests could connect to the network using the SSID and password you customised above.

However, for keeping a check on your guest network information, follow tplinkwifi.net login as above and access the Advanced option. Head over to Status link to locate the Guest Network section that displays all the needed information.

Steps to Customize Guest Network on your TP-link Archer A7 Router via tplinkwifi.net login

Proceed with tplinkwifi.net login or tplinklogin using default IP gateway to access the web based utility of TP-link Archer A7 router. Follow the steps below to customize your guest network.

  • Go to the Advanced menu option on the utility page.
  • Click on the Guest Network option/link.
  • Access the Settings section to Customize guest network options as required.
  • To allow guests to see each other on TP-link Archer A7 router network, select and tick the checkbox.
  • Also, to enable guests to access the local network or devices connected to TP-link Archer A7 router, you could opt to select the checkbox as well.
  • Save the settings.

You have now set up network security and privacy on your TP-link Archer A7 router network via tplinkwifi.net web configuration.

Posted in TP-link Archer A7 Router TP-Link Router
Tagged tplinkwifi.net tplinkwifi.net login tplinkwifi.net setup tplinkwifinet.com www.tplinkwifi.net login
Leave a comment

How to Configure TP-link Smart Connect Feature on TP-Link Wi-Fi Router?

Posted on January 28, 2021 by router

Smart connect feature allows the TP-link router to automatically switch the connected wireless devices to the Wi-Fi band providing the fastest networking speed. This can balance the wireless network load on the router and reduce signal delays and wireless network interruptions. 

How To Configure TP-Link Smart Connect Feature on TP-Link Wi-Fi Router?

This feature can be enabled and configured on the web management page accessible by tplinkwifi.net login or using the tether app (that can be downloaded on your mobile device). 

To Configure The Smart Connect Feature on TP-link Router via Web Management: –

  • Ensure that all the connections between the hardware devices are proper.
  • Ensure that your TP-link wifi router is connected to the wireless Internet connection.
  • Open a web browser on a computer connected to the tplinklogin router by wired or wireless connection.
  • Visit tplinkwifi.net LAN tplinklogin address from browser to log into the router.
  • If tplinkwifi.net gives an issue in tplink login, try an alternative TPlink IP address 192.168.0.1 or 192.168.1.1 to access the web management page.
  •  On the tplink login page, enter tplinkwifi.net default login username or the password in the fields.
  • Enter “admin” in both tplinklogin username and password field.
  •  You are able to access the web based management page of the TP-link router.
  • Visit the Advanced option on the web interface page.
  •  Select Wireless option and then ad then click on Wireless Settings option to access wireless settings.
  • Enable Smart Connect feature by sliding the button to enable it.
  • Also, configure your tplink router’s wireless network settings – username SSID and password. 
  • Create a new password to secure the tplink router connectivity.
  • Click Save to apply your settings.

To Configure The Smart Connect Feature on TP-link Router via Tether App: –

  • Connect your mobile device to the TP-link router’s wireless network connection using tplink router SSID and password.
  • Launch the already installed Tether app on your mobile phone.
  • Select the TP-link router from the displayed device list.
  • Access the wireless settings option.
  • Toggle the smart connect feature by sliding the button to enable it.
  • Also, configure your tplink router’s wireless network settings – username SSID and password. 
  • Create a new password to secure the tplink router connectivity.
  • Click Save to apply your settings.

You must enable the Smart connect feature when you are not sure of the frequency signal of the wireless network or you are not sure about the location that provides you the best wireless signal . Thus, changing your network frequency can deliver a better wifi signal with TP-link router setup of smart connect.

Also, smart connect can be enabled to allow the TPlink wifi router to choose the most efficient and reliable band automatically so that every connected wireless device to the TP-link router’s network can reach its full potential.

Thus, enabling smart connect feature using tplinkwifi.net can let you get the best of TP-link router’s wireless network signals across connected devices.

Posted in TP-Link Router
Tagged Setup Your tplink Router tplinkwifi.net tplinkwifi.net login tplinkwifi.net setup tplinkwifinet.com www.tplinkwifi.net login
Leave a comment

TP-Link Router Setup – tplinkwifi.net

Posted on January 15, 2021 by router

TP-link router should be connected to other hardware devices in order to install and set it up to connect to the wireless network. TP-link setup allows wireless network setup and thus configuring the router. It requires TP-link router login to be able to reach the TP-link router’s web based Utility page, but on the initial TP-link router login, instead a quick setup wizard is directed for TP-link router setup.

 

TP-Link Wi-Fi Router Setup – Using Quick Setup Wizard and tplinkwifi.net

TP-link router setup makes use of the www.tplinkwifi.net as the default gateway to reach Quick Setup Wizard

Guide to TP-link Router Setup:

Before moving ahead to TP-link router setup, you must connect your TP-link router to the hardware devices:

  • Connect the TP-link router to the modem at your place. 
  • Use an Ethernet cable to TP-link router setup with modem joining each other at the WAN ports.
  • And also connect the router to the computer to be able to access the wireless network for tplinkwifi.net setup  login. 
  • TP-link router setup to computer can either use wired Ethernet cable connecting at LAN port or Wi-Fi/wireless network.
  • Power on the router after connecting to the power source.

TP-link Router Quick Setup Wizard Access:

  • Open a web browser on your computer being used for TP-link router setup with recommended wired connection.
  • Navigate to tplinkwifi.net web gateway to access the TP-link router’s setup wizard.
  • If tplinkwifi.net not working or logging error is seen, head over to TP-link router’s default IP address 192.168.0.1 to TP-link router login.
  • As the Login page gets redirected, the key in the TP-link router login details.
  • Enter both the username and password for tplinkwifi.net login as admin (lowercase letters).
  • TP-link router login for the first time opens the Quick Setup Wizard screen.
  • Follow the onscreen stepwise guide by quick setup wizard to TP-link router configuration.

For TP-link Router’s Wireless Network Configuration: 

  • The quick setup wizard takes you through configuration of wireless networks.
  • the setup wizard will automatically choose your connection type
  • It automatically connects your TP-link router to the wireless network. 
  • Create a wireless network name (SSID) for your Wireless Network in the provided field.
  • You are also required to set a wireless password to secure your TP-link Wi-Fi network.
  • TP-link router setup is complete.

The TP-link Router Setup and Configuration can also be done Manually using tplinkwifi.net Login.

With manual TP-link router configuration, you can check your current wireless internet connection settings of TP-link router. It is also possible to modify the wireless settings according to the information provided by your Internet Service Provider.

To Manually TP-link Router Setup via tplinkwifi.net:

  • Following the above mentioned TP-link router login steps use tplinkwifi.net to login to the management page of the router.
  • Select Basic on the web based utility or management page.
  • Choose the Internet option to select your internet connection type from the displayed drop-down list.
  • Get through onscreen instructions on the web page to continue the TP-link router configuration. 
  • Save the tplink login configurations.
  • Click on the Network Map to check your TP-link router’s configuration. 
  • The TP-link router setup completes when the wireless network connection is setup on TP-link router.

 

Posted in Set up TP-LINK ARCHER
Tagged TP-Link Router Setup tplinkwifi.net tplinkwifi.net login tplinkwifi.net setup tplinkwifinet.com
Leave a comment

How to Change The Admin Username and Password of The TP-Link Device?

Posted on January 17, 2019 by router

TP-LINK is Chinese producer or manufacturer of computer networking products. The company’s notion was based on “twisted pair” link, which means a type of electromagnetic cabling; hence the company got its name “TP”.

TP-LINK PRODUCTS:
tp-link products

  • Wireless Routers
  • Mobile Phones
  • ASDL
  • Range extenders
  • Routers
  • Switches
  • Power banks
  • Power line adaptors
  • Print servers
  • Media adaptors, and many more devices.

LATEST NEWS IN TP-LINK

TP-LINK on 7th January 2019 has launched its new series of AX products powered by Broadcom’s 802.11ax (Wi-Fi 6) chipsets. The AX generation product launch includes routers, mesh WiFi systems and range extenders. These products are designed to provide fast WiFi as fast as greased lightning and are able to handle intensive bandwidth loads easily, making it the ideal solution for users who have a number of WiFi devices all over their home. Broadcom Inc. is a leading provider of WiFi/Bluetooth chipsets and is a trailblazer in Wi-Fi 6 technology.

TP-Link’s new Archer AX6000 is a dual-band wireless router that has similar features as that of the Archer AX11000. This new router also includes a 2.5Gbps WAN port so that if the user has a high-speed broadband connection, but does not use it to play games, then this router might be the most suitable router for the user because it costs $100 (approximately 6954 rupees) less than the price of Archer AX11000.

SOME COMMON ISSUES OF TP-LINK FACED BY USERS

How to change the admin username and password of the TP-Link device?

change user name password
To change the admin username and password of your TP-Link WiFi routers. Open webpage tplinkwifi.net or tplinkwifi net you can follow either of the two examples given below depending on your model type:

Example A:

  1. Click on Advanced > System Tools > Administration and finish the settings in the Account Management section.
  2. Enter the old username and old password. Enter the new username and enter the new password twice (both the fields are case-sensitive). Click Save.

Example B:

  1. Click on System Tools > Password on the left panel.
  2. You will be now prompted to change your login information. Click on Save.
  3. The system will redirect you back to the login screen. Enter the new username and password.

NOTE:

  • Before proceeding with the above steps it is assumed that the user has already logged on into TP Link’s web management user interface
  • This web management user interface varies from model to model

How can I know my actual Internet speed?

There are a variety of speed-test tools available online. You can try the most popular site: http://speedtest.net one drawback of this test is that it is Flash based and is not very accurate. For the more accurate test, you can go for HTML5 speed test like http://speedof.me.

I forgot my login password. How to recover it?

The default login credentials are both “admin”, until and unless you have changed. If you have changed it and cannot recall it then you need to reset your wireless router to factory default settings.

  • When your devices is running, press and hold the Reset button present on the rear panel with a pin or straightened paper clip for approximately 10 seconds.
  • After 10 seconds release the Reset button and wait for your router to reboot.
  • Make sure that your router’s power is on before it reboots.

How do I log in to my TP-Link Router?

  • Connect your WiFi router with the WiFi network.
  • Launch the Web browser from your computer or laptop and enter the IP address: 168.1.1, or 192.168.0.1 depending on the type of your router. The address for entering the settings is indicated on the bottom of the router.
  • You will be asked to enter the user name and password. The default is “admin” for both. In case you have changed these settings, then enter the new login credentials.
  • Now you might have successfully logged in to your TP-Link router settings.
Posted in TP-Link TL-WR841N
Tagged Setup Your tplink Router tp link router tplink router setu tplinkwifi.net tplinkwifi.net login tplinkwifi.net setup tplinkwifinet.net
Leave a comment

Post navigation

Older posts

Recent Posts

  • How to Improve my Tp-Link Router Speed or Range?
  • TP-Link AC1200 Gigabit MU-MIMO WiFi Router/Archer A6 Setup and Login Configurations
  • How to Setup and Install TP-Link Archer C9
  • How to use Guest Network Access on TP-link Archer A7 Router?
  • How to Configure TP-link Smart Connect Feature on TP-Link Wi-Fi Router?

Categories

  • Internet speed issue
  • Set up TP-LINK ARCHER
  • TP-link Archer A7 Router
  • TP-Link Archer C1200
  • TP-Link Archer C9
  • TP-Link Router
  • Tp-Link Router Speed or Range
  • TP-Link TL-WR841N

Recent Comments

    tplinkwifi.net

    © All rights reserved.

    Powered by WordPress

    Disclaimer

    This is the Third Party Independent company that provides uses the information to there users. The images and Brand name only for the reference purpose. It is not associates with any brand unless it specifies on the websites. All the rights are reserved by the website owner.

    Recent Post

    • How to Improve my Tp-Link Router Speed or Range?
    • TP-Link AC1200 Gigabit MU-MIMO WiFi Router/Archer A6 Setup and Login Configurations
    • How to Setup and Install TP-Link Archer C9

    Quick Links

    • Home
    • How to Set Up a Mesh Wi-Fi Network ?
    • TP-LINK Kasa Device work with Amazon Alexa
    • Blogs
    • FAQ’s
    • Contact us
    error: Content is protected !!