tplinkwifi.net

tplink wifi setup | tplink login | tplinkwifi.net

Skip to content
  • Home
  • Blogs
  • FAQ’s
  • Contact us
  • Why Fail to Access TPlinkwifi.net?

tplinkwifi router login

How to Setup and Install TP-Link Archer C9

Posted on February 11, 2021 by router

Connect the Hardware

If your Internet connection is through an coaxial cable from the wall rather than through a DSL / Cable / Satellite modem, connect the coaxial cable on to the router’s Internet port, then follow steps 5 and 6 to finish the hardware connection

  1. Install the antennas
  2. Close up the modem, and take away the backup battery if it’s one.
  3. Connect the modem to the web port on your router with a coaxial cable .
  4. Activate the modem, then wait about 2 minutes for it to restart.
  5. Turn on the router.
  6. Verify that the subsequent LEDs are on and solid before continuing with the configuration.

Configure via Web Browser:-

  1. As well as connect your computer to the router (Wired or Wireless):-
  2. Wired:- close up the Wi-Fi on your computer and connect the devices.
  3. Wireless:- Use the default wireless network name (SSID) and password printed on the merchandise label on the rear panel of the router to attach wirelessly.

Configure the router with a web browser:-

  1. Enter http://tplinkwifi.net or http://192.168.0.1 in the address bar of a web browser. As well as use admin for both username and password, then click Login.
  2. Select your region and time zone, and click next.
  3. Select your WAN Connection Type, or click Auto Detect if you are unsure of what your connection type is. Click next and follow the instructions.
  4. Use the default or change the wireless settings, and click next.
  5. Confirm your settings and then click Save to continue or back to make changes.
  6. Test your Internet connection, then click Finish to quit the Quick Setup.

Configure via Tether App:-

TP-LINK’s Tether app lets you conveniently access your router:-

1.View information about the clients on your network.

2.Block network access from specific users or devices.

3.Set up Parental Control with access time and content restrictions.

4.Change the basic wireless network settings easily.

How to start:-

  1. Scan your QR code to download the TP-LINK Tether app from the Apple App Store or Google Play.
  2. As well as ensure your smart device is wirelessly connected to the home network.
  3. Hence launch the Tether app and start managing your home network.

USB Features:-

Hence use the USB ports for media sharing, storage sharing and printer sharing across your local network. You can also find out an FTP server to access your files remotely through the web .

FAQ (Frequently Asked Questions)

What am i able to do if the login window doesn’t appear?

  1. If the computer is set to a static or fixed IP address, change the setting to obtain an IP address automatically.
  2. Verify if http://tplinkwifi.net or http://192.168.0.1 is correctly entered in the web browser. Alternatively, enter http://192.168.1.1 in the web browser.
  3. Use another web browser and try again.
  4. Reboot your router and try again.
  5. Disable and enable the network adapter in use again.

What am i able to do if I cannot access the Internet?

  1. As well as check if the Internet is working properly by connecting a computer directly to the modem via an Ethernet. If it’s not, contact your Internet Service Provider.
  2. Open a web browser, enter http://tplinkwifi.net or http://192.168.0.1 and run the setup again. 3. Reboot your router and try again.
  3. Hence for cable modem users, reboot the modem first. As well as the problem still exists, log into the Web Management page of the router, and go to Advanced > Network > MAC Clone, click Clone MAC Address and then click Save.

How do I restore your router to its factory default settings?

  1. While the router is powered on, press and hold the Reset/WPS button on the back until the LED blinks.
  2. Log into the Web Management page of the router, and go to Advanced > System Tools > Factory Defaults, click Restore. The router will restore and reboot automatically.

What can I do if I forgot my Web Management password?

Reset the router, and then use the default admin (all lowercase) for both username and password to log in.

Posted in TP-Link Archer C9
Tagged Archer C9 Tp-Link router setup C9 Archer Tp-Link router setup How to Setup and Install TP-Link Archer C9 Setup and Install TP-Link Archer C9 TP-Link Archer C9 tplinkwifi tplinkwifi net tplinkwifi router login tplinkwifi.net tplinkwifi.net login tplinkwifi.net setup tplinkwifinet.com
Leave a comment

Internet Speed Issue in TP-Link Routers | tplinkwifi.net

Posted on October 23, 2018 by router

TP-Link Wi-Fi routers are although quite efficient in their working and other functionalities, however, there are some instances when the user faces a bit trouble with the routers i.e. slow network speed and lag in the live media streaming etc. Don’t worries we have got covered it all for the users. Just go through the entire section of our TP-Link router troubleshooting section and your router will be up to date with the new solutions.

TP-link routers tend to malfunction due to several inevitable reasons and those issues can be resolved easily through the solutions provided. The TP-Link router’s setup page needs to be accessed through its default IP address 192.168.1.1 or through its customized web domain www.tplinkwifi.net. This tplinkwifi.net web address is a user-friendly web link as it is easy to remember.

How to resolve the slow internet speed issue in TP-Link router through tplinkwifi.net

Internet speed issue in TP-Link routers

  • The users first need to establish a secure wired or wireless connection between the router and the computer device.
  • Then switch on the power supply adapter and wait for the router device to get into a stable state of the connection.
  • Now, open the web browser of the PC and enter the web address tplinkwifi.net in the address bar of the browser.
  • Proceed on with entering the login details of the router i.e. username and the password. Enter the login details that you have set or carry on with the default values which are an admin for both the fields.
  • Upon successfully entering into the router setup page, just look out for the Advance system settings tab on the top menu pane and click it.
  • Now click the WAN setup tab and select the MTU size tab under this section. After clicking the MTU size button, change its value from 1500 to 1400. It is to be noted that the MTU size value should not be lower than 1400 as it is the lowest value that you can keep.
  • Click save and apply the changes tab and then click the reboot now tab to make all the changes done effectively. Also, it is of much importance that the router reboot at the end shouldn’t be interrupted in any case.

The slower speed of the wireless/wired network happens due to the packet data loss which in turn occurs due to the hardware damage to the Ethernet cables. This means that the connecting Ethernet cords of the router, modem and computer device might be torn or damaged due to mishandling or some other reasons.

Important– Therefore it is important to note that the Ethernet cables should be inserted properly into their designated ports with care. If the Ethernet or some other cables are inserted into the wrong ports, without any care and improperly, then there is a high probability of getting these cables damaged and that would, in turn, decrease the network speed of the router.

What else methods of connecting the router to the computer device can be utilized?

The TP-Link Wi-Fi routers as we know need to be connected to the computer system and that connection can be established through the Ethernet cords. But now let some other alternatives of connection come into light. The other methods except the Ethernet cable connection are listed below.

  • Wi-Fi connection
  • WPS mode of connection

WPS mode of connection

The WPS means the Wi-Fi protected setup method. There is a small button labeled as WPS located either at the top or bottom of the router. The users just need to push that WPS button on the router body after they have opened the wireless section of their computer system.

When the WPS button is pushed, it starts detecting the presence of available wireless devices but it gets connected only to the computer on which the WPS tab is selected. The WPS button works only within a certain range of distance.

Advantages of WPS connection

  1. The WPS mode of connection works only for the wireless networks that support the advanced and latest security keys.
  2. This means that the WPS method is much reliable, efficient, safe and secure for usage.
  3. Wi-Fi protected setup method is the fastest available wireless method of connecting your router and the computer device.
  4. As it is wireless, therefore, the wires will not be needed and the slower network speed issue will not happen due to the wear and tear of the Ethernet cables.

Disadvantages of WPS connection

There are no disadvantages of WPS mode of connection as such but still, some cautions have to be considered and those are listed below.

  1. The WPS connection is not compatible with the wireless routers that are still having the outdated security keys embedded in them for the safety.
  2. These old TP-Link routers use the WEP/WEP2 keys which are not present in the latest TP-Link routers now.
  3. Most of the users don’t synchronize with pushing of the WPS button on the router and simultaneously selecting the WPS tab in their wireless and internet section of the PC.

Unable to log in to the router portal through tplinkwifi.net

Don’t panic if you are not able to log in to the TP-Link wireless router through tplinkwifi.net web address. Although this issue doesn’t happen that often but still it can occur due to some inevitable circumstances, in that case, what you need to do is just switch to the other alternative of accessing the router’s admin setup page through the router’s default IP address i.e. 192.168.1.1 or 192.168.0.1.

Posted in Internet speed issue
Tagged tplinkwifi tplinkwifi net tplinkwifi router login tplinkwifi.net tplinkwifi.net login tplinkwifi.net setup tplinkwifinet.com
Leave a comment

Recent Posts

  • How to Improve my Tp-Link Router Speed or Range?
  • TP-Link AC1200 Gigabit MU-MIMO WiFi Router/Archer A6 Setup and Login Configurations
  • How to Setup and Install TP-Link Archer C9
  • How to use Guest Network Access on TP-link Archer A7 Router?
  • How to Configure TP-link Smart Connect Feature on TP-Link Wi-Fi Router?

Categories

  • Internet speed issue
  • Set up TP-LINK ARCHER
  • TP-link Archer A7 Router
  • TP-Link Archer C1200
  • TP-Link Archer C9
  • TP-Link Router
  • Tp-Link Router Speed or Range
  • TP-Link TL-WR841N

Recent Comments

    tplinkwifi.net

    © All rights reserved.

    Powered by WordPress

    Disclaimer

    This is the Third Party Independent company that provides uses the information to there users. The images and Brand name only for the reference purpose. It is not associates with any brand unless it specifies on the websites. All the rights are reserved by the website owner.

    Recent Post

    • How to Improve my Tp-Link Router Speed or Range?
    • TP-Link AC1200 Gigabit MU-MIMO WiFi Router/Archer A6 Setup and Login Configurations
    • How to Setup and Install TP-Link Archer C9

    Quick Links

    • Home
    • How to Set Up a Mesh Wi-Fi Network ?
    • TP-LINK Kasa Device work with Amazon Alexa
    • Blogs
    • FAQ’s
    • Contact us
    error: Content is protected !!