www.tplinkwifi.net login Archives

This TP-link router setup function allows you to provide Wi-Fi internet access for guests without authorizing any access to TP-link Archer A7 router’s main network and personal files. This lets you create a guest network for them along with letting you customize guest network options to ensure wireless network security.

The initial step to TP-link Archer A7 router setup (TP-link setup) is tplinklogin to access the web based utility interface.

Steps to Create Guest Network Access on TP-link Archer A7 Router – TP-link Setup via tplinkwifi.net:

Open any TPlinklogin supported web browser on your computer which should be prior linked to TP-link Archer A7 router.
Navigate to TP-link Archer A7 router login default web address http://tplinkwifi.net default for tplinklogin in the address bar.
Alternatively, if tplinkwifi.net has an error with tp link login access, visit the default IP address which is http://192.168.0.1 or http://192.168.1.1.
TP-link Archer A7 router login page appears on the screen.
Enter a tplink login default password and username for TP-link Archer A7 router secure login.
The TP-link login default username and password are “admin” and should be keyed in the login fields.
Click on log in to access the TP-link Archer A7 router’s web based utility page.
Go to the Advanced menu option on the utility page.
Click on the Guest Network option/link.
Access the Wireless section to choose Enable Guest Network by selecting the checkbox.
Create a guest network according to your requirement.
As TP-link Archer A7 router is dual band, select both 2.4GHz or 5GHz network bands and tick to select the Enable Guest Network checkbox.
Also, customize the wireless network name SSID by changing it from default values.
Setup the wireless Security mode to WPA/WPA2 Personal for securing the network.
The guest network is set up on TP-link Archer A7 router.
The guests could connect to the network using the SSID and password you customised above.

However, for keeping a check on your guest network information, follow tplinkwifi.net login as above and access the Advanced option. Head over to Status link to locate the Guest Network section that displays all the needed information.

Steps to Customize Guest Network on your TP-link Archer A7 Router via tplinkwifi.net login

Proceed with tplinkwifi.net login or tplinklogin using default IP gateway to access the web based utility of TP-link Archer A7 router. Follow the steps below to customize your guest network.

Go to the Advanced menu option on the utility page.

Click on the Guest Network option/link.
Access the Settings section to Customize guest network options as required.
To allow guests to see each other on TP-link Archer A7 router network, select and tick the checkbox.
Also, to enable guests to access the local network or devices connected to TP-link Archer A7 router, you could opt to select the checkbox as well.
Save the settings.

You have now set up network security and privacy on your TP-link Archer A7 router network via tplinkwifi.net web configuration.

Smart connect feature allows the TP-link router to automatically switch the connected wireless devices to the Wi-Fi band providing the fastest networking speed. This can balance the wireless network load on the router and reduce signal delays and wireless network interruptions.

This feature can be enabled and configured on the web management page accessible by tplinkwifi.net login or using the tether app (that can be downloaded on your mobile device).

To Configure The Smart Connect Feature on TP-link Router via Web Management: –

Ensure that all the connections between the hardware devices are proper.
Ensure that your TP-link wifi router is connected to the wireless Internet connection.
Open a web browser on a computer connected to the tplinklogin router by wired or wireless connection.
Visit tplinkwifi.net LAN tplinklogin address from browser to log into the router.
If tplinkwifi.net gives an issue in tplink login, try an alternative TPlink IP address 192.168.0.1 or 192.168.1.1 to access the web management page.
On the tplink login page, enter tplinkwifi.net default login username or the password in the fields.
Enter “admin” in both tplinklogin username and password field.
You are able to access the web based management page of the TP-link router.
Visit the Advanced option on the web interface page.
Select Wireless option and then ad then click on Wireless Settings option to access wireless settings.
Enable Smart Connect feature by sliding the button to enable it.
Also, configure your tplink router’s wireless network settings – username SSID and password.
Create a new password to secure the tplink router connectivity.
Click Save to apply your settings.

To Configure The Smart Connect Feature on TP-link Router via Tether App: –

Connect your mobile device to the TP-link router’s wireless network connection using tplink router SSID and password.
Launch the already installed Tether app on your mobile phone.
Select the TP-link router from the displayed device list.
Access the wireless settings option.
Toggle the smart connect feature by sliding the button to enable it.

Also, configure your tplink router’s wireless network settings – username SSID and password.
Create a new password to secure the tplink router connectivity.
Click Save to apply your settings.

You must enable the Smart connect feature when you are not sure of the frequency signal of the wireless network or you are not sure about the location that provides you the best wireless signal . Thus, changing your network frequency can deliver a better wifi signal with TP-link router setup of smart connect.

Also, smart connect can be enabled to allow the TPlink wifi router to choose the most efficient and reliable band automatically so that every connected wireless device to the TP-link router’s network can reach its full potential.

Thus, enabling smart connect feature using tplinkwifi.net can let you get the best of TP-link router’s wireless network signals across connected devices.