How Do I TP-link TL-WA801ND Access Point and Repeater Installation?

How do I TP-link TL-WA801ND Access Point and Repeater Installation? – Before the installation of the TP-link TL-WA801ND Access point and repeater, you must know the operation mode for which you are using this particular device.


How do I TP-link TL-WA801ND Access Point and Repeater Installation?

 The access point mode is the default mode installed and set up to transform your wired network cable connection to a wireless one.

The repeater mode is the setting up of TP-link TL-WA801ND in the range extender mode for repeating of the wireless signals in the wifi dead zone.

TP-link TL-WA801ND Installation in Bridge with AP mode allows set up of multiple LAN networks linked to single network making use of wireless network connections instead of wired cable connections.

Installation in the Client mode allows connection setup of the wired devices with no wireless capability to the internet network wirelessly using TP-link TL-WA801ND in client mode.

The multi-SSID mode setup and TP-link TL-WA801ND Installation lets you connect the devices to separate wireless or wifi networks with different VLANs.

TP-link TL-WA801ND installation in Access Point (AP) mode:

  • Connect the TP-link TL-WA801ND access point with the home wired router using the Ethernet cable at the Ethernet ports.
  • The home router must be previously set up to a stable internet connection to a modem.
  • Using the power adapter, connect the TP-link TL-WA801ND access point to the power outlet.
  • Power on the TP-link TL-WA801ND access point and let the status power LED as well as wireless LED be lit.
  • Using the default wireless settings of the TP-link TL-WA801ND access point, connect your devices to its wifi network.
  • The default SSID and password could be located printed on the access point’s label. 
  • Launch a web browsing window on your device wirelessly connected to TP-link TL-WA801ND access point’s network.
  • Navigate to as default domain address for TP-link login.
  • On the TP-link login page of TP-link TL-WA801ND access point, use “admin” as both username and password in respective fields for TPlinklogin.
  • Click on the Click Setup tab on the TP-link setup/configuration screen.
  • Choose the Access Point mode.
  • Click on the Next option.
  • Follow the step by step onscreen instructions to complete the TP-link TL-WA801ND access point network configuration and setup.
  • When prompted, change the default SSID and password from admin to strong alphanumeric characters for wireless network security of TP-link TL-WA801ND access point.
  • Reconnect all the previously connected wireless devices to the new assigned SSID and password.


What if  is not accessible for TP-link repeater setup?

  • Check if you are receiving a stable internet connection which might cause hindrance in accessing
  • Next, check wire c properly cable connections or wireless settings connecting devices.
  • Use another web browser to access for tplink login.
  • Ultimately, try to reset the TP-link repeater to factory default settings and then access with default login password.

What if I am getting slow internet network speed after installing and connecting to TP-link repeater’s wifi?

  • Avoid assigning the same SSID or network name for TP-link AP or repeater as the source router and create separate names. 
  • Check the network status of the TP-link AP or repeater wifi signal as indicated by LED; weak signals suggest repositioning of the TP-link repeater close to the TP-link router.
  • Take the speed test to ensure if the wireless repeater’s signal strength is strong and recommended.  Otherwise, reposition the repeater or AP three meters far from the source router.

What should I do if I fail to configure TP-Link Access Point?

  • Try to reset the TP-link access point by pushing down and holding the reset button on the AP until all the status LEDs turn on stably.
  • Power cycle your TP-link AP by unplugging the AP from the power outlet and then re-plugging and powering it on.

What to do if my wireless network is not stable?

  • This could be possibly due to signal interference; change the wireless channel to a different channel by accessing the wireless settings through TP-link login (via or ) into the web based management page.
  • Also, position the access point or range extender to a new location away from Electronic or Bluetooth devices to minimize wireless signal interference.

What if I am unable to access the web management page of the access point?

  • Check if or is entered correctly in the launched browser.
  • Try using another web browser or different device to login.
  • Reboot your TPlink access point or extender and try to access the web management page.

How to Improve my Tp-Link Router Speed or Range?

How to Improve my Tp-Link Router Speed or Range?

How to Improve my Tp-Link Router Speed or Range?To improve the wireless speed or range, it’s highly recommended to figure on the subsequent common solutions:-

  1. Choosing the best Location
  2. Optimizing configuration of the device
  3. Upgrade the equipment

Symptom:-Weak wireless signal showed, as well as low wireless speed or range.

Cause:-The factors most frequently affecting the wireless signal:

1) Intrinsic factors: •Transmission Distance:-

Regarding the wireless device particularly performing on 5GHz band, it’ll be more sensitive to the obstacle. Though there’ll be more clear channels than those of two .4GHz bands, the wireless signal are going to be reduced significantly and transmit in shorter range thanks to higher frequency.


  1. Omni-directional antennas and directional antennas
  2. Hence Omni-directional antennas are resembled in our home products like wireless router or wireless ADSL2+ Modem Routers, they radiate horizontally all around, but are weaker upward or downward.
  3. While the directional antennas radiate strongly in a particular direction which are usually used for high power outdoor products. The gain of an antenna increases, also with the coverage distance, but the effective coverage angle decreases. Generally, the upper gain value of an antenna, the higher directional ability is going to be .

For directional antennas, the lobes are pushed during a certain direction and tiny energy is there on the rear side of the antenna. This Phenomenon going to be more significant once you deploy the High-Gain antenna, so we recommend that to verify precisely on horizon direction otherwise there will be unexpected dramatic signal loss.

Wireless communication performance:-Higher transmission rates, better performance

2) Extrinsic factors-

– Physical Barriers, like wall or clapboard then on;

– Other similar devices and other sources like microwave ovens, cordless phones or other technologies that use an equivalent band as Bluetooth

– There are quite one AP or wireless routers working within the same Channel.

– The situation where an AP or wireless router is placed. You’d better to put the device at a better location to scale back the barrier’s counter check.

Solution: Choosing the best location:-

1) Antennas should be positioned for best location as well as direction:-

  1. Deploy the antenna in good location and proper angle, and also confirm your wireless client devices are within the coverage;
  2. For multi-story buildings Tp-link router coverage, we recommend placing antennas at 45 degrees (diagonally) or 0 degrees (straight out parallel to the floor) which will be more effective. As well as the antennas always transmit weakly at the bottom, don’t place your wireless client device at the rock bottom of TP-Link wireless router or access point.

2) Try best to avoid the extrinsic interference:-

  1. Avoiding the physical interference in the Tp-link wireless router coverage, each wall or ceiling will have a negative effect on wireless radio particularly the ones built by solid metal material.
  2. Keep your device faraway from various electromagnetic noise sources that generate RF noise, like microwaves, Monitors, electric motors, copying and fax machines, etc.

Optimize configuration of the device:-

– For TP-Link router products, we recommend to do corresponding settings to avoid the interference from other networking and radio frequency equipment.

Hence we take TL-WR1043ND user interface as an example and then please go to Wireless->Wireless settings and change the channel settings, as well as the default value is Auto and hence we recommend select 1, 6 or 11 if you suffer high wireless interference.

Upgrade the equipment:-

– If you would like to possess an enormous improvement immediately and boost the wireless throughput, you’ll also prefer to upgrade a mixture of antennas or other wireless equipment to enhance the wireless transmission;

– Hence if you are in a congestion wireless environment, the wired connection can be taken into consideration and the Tp-Link Power line Equipments is a good alternative.